DIY Mini Split
Systems
Built to Last.
Professional-grade ductless heating and cooling — engineered for self-installation. No vacuum pump. No contractor. No compromise.
single zones • Flareless line sets — cut to length • Mix King & Emperor indoor handlers
GWIN Assisted DIY 9,000 BTU 20.5 SEER2 115V King 13 Single Zone Ductless Mini-Split Complete System with 15 Foot Line Set, Communication Wire, and GWIN Tech
- 115V single phase
- Heating to −13°F
- Complete system
- All GWIN™ guarantees
GWIN Assisted DIY 9,000 BTU 20.5 SEER2 115V King Single Zone Ductless Mini-Split Complete System with 15 Foot Line Set, Communication Wire, and GWIN Tech The GWIN 9,000 BTU 20.5 SEER2 115V King Single Zone Ductless Mi...
GWIN Assisted DIY 9,000 BTU 20.5 SEER2 115V King Single Zone Ductless Mini-Split Complete System with 15 Foot Line Set, Communication Wire, and GWIN Tech
The GWIN 9,000 BTU 20.5 SEER2 115V King Single Zone Ductless Mini-Split Complete System is a compact and efficient heating and cooling solution for bedrooms, offices, studios, and other small spaces. Designed for dependable comfort and easy everyday use, this 115V ductless mini-split system offers efficient inverter-driven performance in a sleek wall-mounted design.
With a 20.5 SEER2 rating, this 9,000 BTU mini-split heat pump helps reduce energy consumption while maintaining more stable temperatures indoors. It uses R32 refrigerant for enhanced energy efficiency and a lower environmental impact, and it includes a 15 foot line set and communication wire for added installation convenience.
Efficient Comfort for Smaller Rooms
This King Series system is a strong option for smaller residential rooms and similar single-zone applications where simple, efficient comfort is the goal. Its inverter-based operation helps reduce cycling and supports a more consistent indoor environment.
Key Features
- 9,000 BTU single zone ductless mini-split for small spaces
- 20.5 SEER2 efficiency for energy-conscious performance
- 115V operation for compatible standard-voltage applications
- Wi-Fi Included
- Low ambient cooling down to 0°F (range: 0°F to 118°F)
- Low ambient heating down to -13°F (range: -13°F to 75°F)
- Blue colored fin - 500 hours salt spray tested
- Indoor and outdoor coil: Copper tube / aluminum fin
- Basepan with electric heater
- Compressor with electric heater
- Intelligent defrosting
- Intelligent preheating
- Low voltage startup
- Memory / power failure recovery
- Self diagnosis
- Multiple fan speeds (6 speeds)
- I Feel function
- Quiet operation for everyday indoor comfort
Reliable Cold Weather Performance
The King Single Zone series is built for dependable heating operation in colder conditions, with a heating range down to -13°F and up to 75°F. This makes it a practical choice for buyers seeking a 9,000 BTU cold weather mini-split heat pump with efficient year-round operation.
Assisted DIY Installation Advantage
GWIN is built for homeowners and installers who want the freedom of a full Assisted DIY install with full warranty while still having expert support available from day one. This system is positioned as the first Assisted DIY system to come with a tech, giving buyers added confidence during installation and startup.
- Professional commercial grade compressors and control boards
- Flareless brassless connection approach
- Cut-to-length line set installation flexibility
- Comes with GWIN tech included — described as the first system to ever come with a tech *only to commission system
- No worries in your install with a GWIN Tech included
- Full Assisted DIY install with full warranty
System Information
| System Type | Heat Pump |
| Indoor Model | KING09HP115V1R32AH |
| Outdoor Model | KING09HP115V1R32AO |
| Remote Controller | YBE1FB1F |
| Optional Wired Controller | XE71 |
Performance Specifications
| Cooling Capacity (Min - Max) | 2,700 - 11,600 BTU/h |
| Rated Cooling Capacity @ 95°F | 9,100 BTU/h |
| Heating Capacity (Min - Max) | 2,400 - 13,300 BTU/h |
| Rated Heating Capacity @ 47°F | 10,000 BTU/h |
| Rated Heating Capacity @ 17°F | 8,100 BTU/h |
| Rated Heating Capacity @ 5°F | 7,600 BTU/h |
| SEER2 | 20.5 |
| EER2 | 11.9 |
| HSPF2 | 8.8 |
| COP @ 5°F | 1.86 |
| Cooling Temperature Range | 0°F to 118°F |
| Heating Temperature Range | -13°F to 75°F |
| Refrigerant Type | R32 |
Indoor Unit Specifications
| Model | KING09HP115V1R32AH |
| Air Flow (Min - Max) | 159 - 353 CFM |
| Sound Pressure Level (Min - Max) | 24 - 43 dB(A) |
| Dehumidification | 1.69 pt/hr |
| Unit Dimensions (W x H x D) | 32-7/8 x 10-53/64 x 7-7/8 in. |
| Package Dimensions (W x H x D) | 35-15/64 x 13-37/64 x 10-43/64 in. |
| Net Weight | 19.8 lbs |
| Gross Weight | 24.3 lbs |
Outdoor Unit Specifications
| Model | KING09HP115V1R32AO |
| Compressor Type | GWIN G20 / Single Cylinder / 1-Stage Inverter |
| Sound Pressure Level | 51 dB(A) |
| Unit Dimensions (W x H x D) | 28-13/16 x 21-7/8 x 12-63/64 in. |
| Package Dimensions (W x H x D) | 31-17/64 x 24-7/32 x 14-51/64 in. |
| Net Weight | 55.1 lbs |
| Gross Weight | 60.6 lbs |
Refrigerant Piping
| Refrigerant Charge | 18.7 oz |
| Additional Charge | 0.2 oz/ft |
| Line Set Size (Liquid - Gas) | 1/4 - 3/8 in. |
| Pre-Charge Length | 25 ft |
| Pipe Length (Min - Max) | 10 - 66 ft |
| Max Pipe Elevation | 40 ft |
Electrical
| Power Supply | 115V / 1Ph / 60Hz (Powered by the Outdoor Unit) |
| Voltage Range | 103 - 126 VAC |
| Rated Current - Cooling | 12.5 A |
| Rated Current - Heating | 15.4 A |
| MOCP | 20 A |
| MCA | 19 A |
| Main Power Wire Size | Per Local Code |
| Interconnecting Wire Size | 14 / 4 AWG |
Remote Controller Functions
- Auto Mode
- Auto Fan
- Auto Swing (Horizontal Auto Swing)
- Auto Swing (Vertical Auto Swing)
- Clock on Remote Controller
- Dry Mode
- Dry Anti-Mildew (X-Fan) Mode
- Energy Saving Mode
- I Feel Function
- Lock on Remote Controller
- Quiet Mode
- Room Temperature Display
- Sleep Mode
- Timer Mode
- Turbo Mode
- Display On/Off Control
- Freeze Guard Mode (46°F)
Indoor Unit Dimensions (Unit: inch)
External Dimensions
- W: 32-7/8
- H: 10-53/64
- D: 7-7/8
Package Dimensions
- W: 35-15/64
- H: 13-37/64
- D: 10-43/64
Outdoor Unit Dimensions (Unit: inch)
External Dimensions
- W: 28-13/16
- H: 21-7/8
- D: 12-63/64
Package Dimensions
- W: 31-17/64
- H: 24-7/32
- D: 14-51/64
Minimum Clearance Requirements
Indoor Unit
- Space to the ceiling: at least 3 inches
- Space to the wall: at least 2 inches
- Space to the floor: at least 48 inches
- Space to the obstruction: at least 48 inches
Outdoor Unit
- Space to the obstruction (top): at least 12 inches
- Space to the obstruction (side): at least 6 inches
- Space to the wall: at least 6 inches
- Space to the obstruction (front): at least 24 inches
- Space to the obstruction (other side): at least 6 inches
Note: If the bottom of the unit is free of airflow obstructions similar to the mounting bracket figure, the clearance to the wall on the back can be reduced to 3 inches.
Included in This Complete System
- GWIN 9,000 BTU King indoor air handler
- Matching outdoor condenser
- 15 foot line set
- Communication wire
- Remote comfort functions
Ideal Applications
This 9,000 BTU 115V ductless mini-split complete system is ideal for bedrooms, offices, small dens, guest rooms, workshops, and similar spaces where compact, efficient heating and cooling are needed.
Please consult submittal for image.
The Evolution of DIY Mini Splits
GWIN™ Assisted DIY™
Most DIY mini splits still leave the hardest parts up to you — pressure testing, vacuuming the system, handling refrigerant, or finding your own tech, and even dealing with bulky pre-charged line sets. GWIN™ HVAC changes all of that with Assisted DIY™. The GWIN Assisted DIY 9,000 BTU 20.5 SEER2 115V King 13 Single Zone Ductless Mini-Split Complete System with 15 Foot Line Set, Communication Wire, and GWIN Tech with Assisted DIY™ is an evolution over DIY alone and makes GWIN™ a complete DIY mini split system that includes free expert tech support, with a tech included, so you never need special tools, never touch refrigerant, never run a vacuum pump, and never perform a pressure test. Our line sets with our easy connect flare-less fittings, allow for a professional operating system, with a professional look. Which also means no coiled mess and no guesswork — just a straightforward self-install ductless system that goes in like a true DIY HVACproject, backed by professionals every step of the way. Whether you're cooling or heating a garage, basement, bedroom, sunroom, home addition, tiny home, or cabin — GWIN™ HVAC is the ultimate DIY ductless solution with our Assisted DIY™ for homeowners who want to do it themselves, but done right." GWIN™ HVAC is the advanced version of DIY mini splits.
GWIN Assisted DIY 12,000 BTU 19 SEER2 115V King 13 Single Zone Ductless Mini-Split Complete System with 15 Foot Line Set, Communication Wire, and GWIN Tech
- 115V single phase
- Heating to −13°F
- Complete system
- All GWIN™ guarantees
GWIN Assisted DIY 12,000 BTU 19 SEER2 115V King Single Zone Ductless Mini-Split Complete System with 15 Foot Line Set, Communication Wire, and GWIN Tech The GWIN 12,000 BTU 19 SEER2 115V King Single Zone Ductless Mini...
GWIN Assisted DIY 12,000 BTU 19 SEER2 115V King Single Zone Ductless Mini-Split Complete System with 15 Foot Line Set, Communication Wire, and GWIN Tech
The GWIN 12,000 BTU 19 SEER2 115V King Single Zone Ductless Mini-Split Complete System with 15 Foot Line Set, Communication Wire, and GWIN Tech is a compact and efficient heating and cooling solution for bedrooms, offices, studios, and other small spaces. Designed for dependable comfort and easy everyday use, this 115V ductless mini-split system offers efficient inverter-driven performance in a sleek wall-mounted design.
With a 19 SEER2 rating, this 12,000 BTU mini-split heat pump helps reduce energy consumption while maintaining more stable temperatures indoors. It uses R32 refrigerant for enhanced energy efficiency and a lower environmental impact, and it includes a 15 foot line set and communication wire for added installation convenience.
Efficient Comfort for Smaller Rooms
This King Series system is a strong option for smaller residential rooms and similar single-zone applications where simple, efficient comfort is the goal. Its inverter-based operation helps reduce cycling and supports a more consistent indoor environment.
Key Features
- 12,000 BTU single zone ductless mini-split for small spaces
- 19 SEER2 efficiency for energy-conscious performance
- 115V operation for compatible standard-voltage applications
- Wi-Fi Included
- Low ambient cooling down to 0°F (range: 0°F to 118°F)
- Low ambient heating down to -13°F (range: -13°F to 75°F)
- Indoor and outdoor coil: Copper tube / aluminum fin
- Blue Colored Fin - 500 Hrs Salt Spray Tested
- Basepan with electric heater
- Compressor with electric heater
- Intelligent defrosting
- Force defrosting
- Intelligent preheating
- Low voltage startup
- Memory / power failure recovery
- Self diagnosis
- Multiple fan speeds
- Indoor unit display
- A2L leak detection sensor (indoor) factory installed
- Quiet operation for everyday indoor comfort
Reliable Cold Weather Performance
The King Single Zone series is built for dependable heating operation in colder conditions, with a heating range down to -13°F and up to 75°F. This makes it a practical choice for buyers seeking a 12,000 BTU cold weather mini-split heat pump with efficient year-round operation.
Assisted DIY Installation Advantage
GWIN is built for homeowners and installers who want the freedom of a full Assisted DIY install with full warranty while still having expert support available from day one. This system is positioned as the first Assisted DIY system to come with a tech, giving buyers added confidence during installation and startup.
- Professional commercial grade compressors and control boards
- Flareless brassless connection approach
- Cut-to-length line set installation flexibility
- Comes with GWIN tech included — described as the first system to ever come with a tech *only to commission system
- No worries in your install with a GWIN Tech included
- Full Assisted DIY install with full warranty
Included in This Complete System
- GWIN 12,000 BTU King indoor air handler
- Matching outdoor condenser
- 15 foot line set
- Communication wire
- Remote comfort functions
Ideal Applications
This 12,000 BTU 115V ductless mini-split complete system is ideal for bedrooms, offices, small dens, guest rooms, workshops, and similar spaces where compact, efficient heating and cooling are needed.
System Information
| System Type | Heat Pump |
| Indoor Model | KING12HP115V1R32AH |
| Outdoor Model | KING12HP115V1R32AO |
| Remote Controller | YBE1FB1F |
| Optional Wired Controller | XE71 |
Performance Specifications
| Cooling Capacity (Min - Max) | 3,070 - 13,300 BTU/h |
| Rated Cooling Capacity @ 95°F | 12,000 BTU/h |
| Heating Capacity (Min - Max) | 3,070 - 14,600 BTU/h |
| Rated Heating Capacity @ 47°F | 12,000 BTU/h |
| Rated Heating Capacity @ 17°F | 9,700 BTU/h |
| Rated Heating Capacity @ 5°F | 8,500 BTU/h |
| SEER2 | 19.0 |
| EER2 | 9.3 |
| HSPF2 | 8.5 |
| COP @ 5°F | 1.75 |
| Cooling Temperature Range | 0°F to 118°F |
| Heating Temperature Range | -13°F to 75°F |
| Refrigerant Type | R32 |
Indoor Unit Specifications
| Model | KING12HP115V1R32AH |
| Air Flow (Min - Max) | 182 - 424 CFM |
| Sound Pressure Level (Min - Max) | 27 - 47 dB(A) |
| Dehumidification | 2.96 pt/hr |
| Unit Dimensions (W x H x D) | 32-7/8 x 10-53/64 x 7-7/8 in. |
| Package Dimensions (W x H x D) | 35-15/64 x 13-37/64 x 10-43/64 in. |
| Net Weight | 19.8 lbs |
| Gross Weight | 24.3 lbs |
Outdoor Unit Specifications
| Model | KING12HP115V1R32AO |
| Compressor Type | GWIN G20 / Single Cylinder / 1-Stage Inverter |
| Sound Pressure Level | 52 dB(A) |
| Unit Dimensions (W x H x D) | 28-13/16 x 21-7/8 x 12-63/64 in. |
| Package Dimensions (W x H x D) | 31-17/64 x 24-7/32 x 14-51/64 in. |
| Net Weight | 58.4 lbs |
| Gross Weight | 63.9 lbs |
Refrigerant Piping
| Refrigerant Charge | 17.6 oz |
| Additional Charge | 0.2 oz/ft |
| Line Set Size (Liquid - Gas) | 1/4 - 3/8 in. |
| Pre-Charge Length | 25 ft |
| Pipe Length (Min - Max) | 10 - 66 ft |
| Max Pipe Elevation | 40 ft |
Electrical
| Power Supply | 115V / 1Ph / 60Hz (Powered by the Outdoor Unit) |
| Voltage Range | 103 - 126 VAC |
| Rated Current - Cooling | 14.34 A |
| Rated Current - Heating | 14.64 A |
| MOCP | 20 A |
| MCA | 19 A |
| Main Power Wire Size | Per Local Code |
| Interconnecting Wire Size | 14 / 4 AWG |
Remote Controller Functions
- Auto Mode
- Auto Fan
- Auto Swing (Horizontal Auto Swing)
- Auto Swing (Vertical Auto Swing)
- Clock on Remote Controller
- Dry Mode
- Dry Anti-Mildew (X-Fan) Mode
- Energy Saving Mode
- Dirty Filter Alert
- I Feel Function
- Lock on Remote Controller
- Quiet Mode
- Room Temperature Display
- Sleep Mode
- Timer Mode
- Turbo Mode
- Display On/Off Control
- Freeze Guard Mode (46°F)
Indoor Unit Dimensions (Unit: inch)
External Dimensions
- W: 32 7/8
- H: 10 53/64
- D: 7 7/8
Package Dimensions
- W: 35 15/64
- H: 13 37/64
- D: 10 43/64
Outdoor Unit Dimensions (Unit: inch)
External Dimensions
- W: 28 13/16
- H: 21 7/8
- D: 12 63/64
Package Dimensions
- W: 31 17/64
- H: 24 7/32
- D: 14 51/64
Minimum Clearance Requirements
Indoor Unit
- Space to the ceiling: at least 3 inches
- Space to the wall: at least 2 inches
- Space to the floor: at least 48 inches
- Space to the obstruction: at least 48 inches
Outdoor Unit
- Space to the obstruction (top): at least 12 inches
- Space to the obstruction (side): at least 6 inches
- Space to the wall: at least 6 inches
- Space to the obstruction (front): at least 24 inches
- Space to the obstruction (other side): at least 6 inches
Note: If the bottom of the unit is free of airflow obstructions similar to the mounting bracket figure, the clearance to the wall on the back can be reduced to 3 inches. Please consult submittal for image.
The Evolution of DIY Mini Splits
GWIN™ Assisted DIY™
Most DIY mini splits still leave the hardest parts up to you — pressure testing, vacuuming the system, handling refrigerant, or finding your own tech, and even dealing with bulky pre-charged line sets. GWIN™ HVAC changes all of that with Assisted DIY™. The GWIN Assisted DIY 12,000 BTU 19 SEER2 115V King 13 Single Zone Ductless Mini-Split Complete System with 15 Foot Line Set, Communication Wire, and GWIN Tech with Assisted DIY™ is an evolution over DIY alone and makes GWIN™ a complete DIY mini split system that includes free expert tech support, with a tech included, so you never need special tools, never touch refrigerant, never run a vacuum pump, and never perform a pressure test. Our line sets with our easy connect flare-less fittings, allow for a professional operating system, with a professional look. Which also means no coiled mess and no guesswork — just a straightforward self-install ductless system that goes in like a true DIY HVACproject, backed by professionals every step of the way. Whether you're cooling or heating a garage, basement, bedroom, sunroom, home addition, tiny home, or cabin — GWIN™ HVAC is the ultimate DIY ductless solution with our Assisted DIY™ for homeowners who want to do it themselves, but done right." GWIN™ HVAC is the advanced version of DIY mini splits.
Upgrades for Flareless Line Set (from 15 feet) In Pre Made Bundles
Flareless Line set upgrade from 15' line set.
Condensers Wall Mounting Bracket 18k-36k
Wall mounting brackets for condensers. Can hold up to 3 tons (36k) condensers. Specifications and dimensions: 31x16x20 in. 300 lbs loading capacity Suitable for 9,000-36,000 BTU condensers Equipped with security...
Wall mounting brackets for condensers. Can hold up to 3 tons (36k) condensers.
Specifications and dimensions:
- 31x16x20 in.
- 300 lbs loading capacity
- Suitable for 9,000-36,000 BTU condensers
- Equipped with security clip
- Preassembled set
Condenser Pad
This condenser pad will fit all of the GWIN Condensers available. Why purchase an Condenser Pad? 1. Protects the unit from pest, insects and critters that may cause damage to the condenser. 2. Reduce vibration from t...
This condenser pad will fit all of the GWIN Condensers available.
Why purchase an Condenser Pad?
1. Protects the unit from pest, insects and critters that may cause damage to the condenser.
2. Reduce vibration from the AC against this pad so it does not hit against the ground. If a condenser is not placed on a support system like a pad, you risk damage being done each time the condenser vibrates against the ground.
Pros
- Unaffected by UV or weather
- Uniform rubbing transfers load evenly
- Lightweight, yet incredibly rugged
Material Type: Polypropylene
Condenser Ground Stand Brackets
Specifications and dimensions: Length 35" x Width 18" x Height 11" Loading capacity 264 lbs
PVC Line Covers
Line set covers Specifications and dimensions: 13 ft length 3 inches width 2 head wall covers Extra white covers Cold resistance: -40°F Heat resistance: 140°F Lifespan exceeding 10 years
GWIN Line Covers
GWIN 4" x 14 ft. Mini-Split Line Set Cover Kit – Paintable, Weather-Resistant HVAC Protection Give your mini-split installation a clean, professional finish with the GWIN Mini-Split Line Set Cover Kit. Des...
GWIN 4" x 14 ft. Mini-Split Line Set Cover Kit – Paintable, Weather-Resistant HVAC Protection
Give your mini-split installation a clean, professional finish with the GWIN Mini-Split Line Set Cover Kit. Designed to conceal and protect refrigerant tubing, electrical wiring, and drain lines, this durable cover system enhances curb appeal while helping extend the life of your HVAC components. Ideal for residential or light commercial installations, both indoors and outdoors.
Key Features & Benefits
- Complete Installation Kit: Includes straight line-set channels, couplers, wall cover, end cap, and an adjustable elbow for a streamlined, finished look.
- Generous 4" x 14 ft. Coverage: Fits most standard mini-split line sets, electrical cables, and drain hoses with ample interior space for easy routing.
- Durable & Weather-Resistant Construction: Built from high-quality, UV-resistant material to help protect HVAC lines from sun exposure, moisture, debris, and environmental wear.
- Paintable for a Seamless Look: Clean white finish can be painted to match siding, brick, stucco, or interior walls for a custom appearance.
- Easy, Modular Installation: Snap-together design supports quick installation with minimal tools—great for HVAC professionals and DIY homeowners.
Why Choose GWIN?
GWIN accessories are designed to deliver professional-grade performance with clean aesthetics. This line set cover kit not only protects vital HVAC components, but also elevates the overall appearance of your installation so it blends seamlessly into any space.
Product Specifications
- Brand: GWIN
- Application: Mini-split systems, heat pumps, air conditioners
- Coverage Length: 14 ft
- Width: 4 inches
- Color: White (paintable)
- Material: Weather- and UV-resistant PVC
- Indoor / Outdoor Use: Yes
- Installation Type: Surface-mounted, modular snap-fit
Included in This Kit
- Straight line-set cover sections
- Couplers
- Adjustable elbow (90°–120°)
- Wall penetration cover
- End cap
Note: Paint before installation for best results. Verify measurements and routing requirements prior to mounting.
Disconnect Switch and Electrical Whip with #10 AWG
No description available.
Disconnect Switch and Electrical Whip with #8 AWG
No description available.
GWIN Assisted DIY 18,000 BTU 230V King (18k condenser 9K+9K Wall Mount) Complete System With 15' Line Set Communication Wire and GWIN Assisted DIY Tech
- 230V single phase
- Heating to −22°F
- Complete system
- All GWIN™ guarantees
GWIN 18,000 BTU 230V King (18k condenser 9K+9K Wall Mount) Complete System With 15' Line Set, Communication Wire & GWIN Tech Bring efficient multi-room comfort home with this GWIN 230V two-zone complete system. T...
GWIN 18,000 BTU 230V King (18k condenser 9K+9K Wall Mount) Complete System With 15' Line Set, Communication Wire & GWIN Tech
Bring efficient multi-room comfort home with this GWIN 230V two-zone complete system. This package pairs an 18,000 BTU outdoor condenser with two 9,000 BTU wall-mount indoor air handlers, making it a great fit for two separate areas that need individualized comfort control. This combination is perfect if you have two rooms that are ~400 sq ft each.
Designed for flexibility and confidence, this bundle includes two 15-foot line sets, two 15-foot communication wires, two remote controls, and 1x GWIN Tech to commission your system.
The GWIN 18,000 BTU King (9K+9K) Complete System is a two-zone 230V ductless solution built around an 18,000 BTU outdoor heat pump and matched 9k + 9k wall-mount indoor units. With included 15' line sets, communication wire, remotes, Wi-Fi-ready indoor units, and 1x GWIN Tech included for commissioning, this package delivers an Assisted DIY Installation advantage with expert support from day one. System performance is powered by the outdoor unit and depends on connected indoor units.
Assisted DIY Installation Advantage
GWIN is built for homeowners and installers who want the freedom of a full Assisted DIY install with full warranty while still having expert support available from day one. This system is positioned as the first Assisted DIY system to come with a tech, giving buyers added confidence during installation and startup.
- Professional commercial grade compressors and control boards
- Flareless brassless connection approach
- Cut-to-length line set installation flexibility
- Comes with GWIN Tech included — described as the first system to ever come with a tech, only to commission system
- No worries in your install with a GWIN Tech included
- Full Assisted DIY install with full warranty
BTU - Square Feet
- 9k Wall Mount Air Handler- capable of cooling and heating up to 400 sq ft
- 9k Wall Mount Air Handler- capable of cooling and heating up to 400 sq ft
What Is Included
- 1x GWIN Tech
- 2x GWIN 9,000 BTU King wall-mount indoor air handlers
- 1x 18,000 BTU outdoor condenser
- 2x 15 foot line sets
- 2x Communication wires
- 2x Remote controls
Why Buyers Like This Bundle
- Two-zone comfort with separate indoor units for better room-to-room control
- Outdoor condenser supports multi-zone operation
- Wi-Fi included on both indoor units
- 7 indoor fan speeds on each wall-mount unit
- Low ambient operation down to -22°F on the outdoor unit for both cooling and heating ranges
- Base pan heater, intelligent defrosting, intelligent preheating, and low voltage startup built into the outdoor unit
Indoor Unit Specifications – 9,000 BTU Wall Mount
| Indoor Model | KING09HP230V1R32AH |
| System Type | Heat Pump |
| Cooling Capacity | 9,000 Btu/h |
| Heating Capacity | 10,000 Btu/h |
| Refrigerant Type | R32 |
| Air Flow (Min - Max) | 235 - 424 CFM |
| Sound Pressure Level (Min - Max) | 27 - 45 dB(A) |
| Dehumidification | 2.11 pt/hr |
| External Dimensions (W x H x D) | 32-7/8 x 10-53/64 x 7-7/8 in |
| Package Dimensions (W x H x D) | 35-15/64 x 13-37/64 x 10-43/64 in |
| Net Weight | 19.8 lbs |
| Gross Weight | 24.3 lbs |
| Line Set Size (Liquid - Gas) | 1/4 - 3/8 in |
| Power Supply | 208-230V / 1Ph / 60Hz (Powered by the Outdoor Unit) |
9,000 BTU Indoor Features & Functions
- Wired controller interface: Yes
- WiFi included: Yes
- Indoor fan type: Crossflow
- Multi fan speeds: 7 Speeds
- Indoor unit display: Yes
- Auxiliary electrical heater: No
- Ventilation (Outdoor Air): No
- Remote control functions: Auto Mode, Auto Fan, Horizontal Auto Swing, Vertical Auto Swing, Clock, Dry Mode, Dry Anti-Mildew (X-Fan), Energy Saving, I Feel, Lock, Quiet Mode, Room Temperature Display, Sleep Mode, Timer Mode, Turbo Mode, Display On/Off Control, Freeze Guard Mode (46°F)
Outdoor Condenser Specifications
System Performance (Non-Ducted Indoor Units)
| Outdoor Model | GMUL18HP230V1R32AO |
| Number of Zones | 2 |
| Cooling Capacity (Min - Max) | 7,300 - 19,800 Btu/h |
| Cooling Rated Capacity @95°F | 18,000 Btu/h |
| Heating Capacity (Min - Max) | 7,300 - 18,100 Btu/h |
| Heating Rated Capacity @47°F | 18,000 Btu/h |
| Heating Rated Capacity @17°F | 16,000 Btu/h |
| Heating Rated Capacity @5°F | 13,800 Btu/h |
| SEER2 | 21 |
| EER2 | 12.0 |
| HSPF2 | 10.0 |
| COP @5°F | 2.0 |
Outdoor Unit
| System Type | Heat Pump |
| Cooling Temperature Range | -22 to 118°F |
| Heating Temperature Range | -22 to 75°F |
| Refrigerant Type | R32 |
| Sound Pressure Level | 51 dB(A) |
| External Dimensions (W x H x D) | 32-23/64 × 21-42/64 × 13-55/64 in |
| Package Dimensions (W x H x D) | 34-21/64 × 24-13/32 × 15-43/64 in |
| Net Weight | 78.3 lbs |
| Gross Weight | 84.9 lbs |
Refrigerant Piping
| Refrigerant Charge - R32 | 31.752 oz |
| Additional Charge | 0.2 oz/ft |
| Port A (Liquid - Gas) | 1/4 - 3/8 in |
| Port B (Liquid - Gas) | 1/4 - 3/8 in |
| Pre-Charge Length | 33 ft |
| Pipe Length (Min - Max) | 10 - 131 ft |
| Pipe Length to Furthest Indoor Unit | 66 ft |
| Max Pipe Elevation | 49 ft |
Electrical
| Power Supply | 208-230V / 1Ph / 60Hz |
| Voltage Range (Min - Max) | 187 - 253 VAC |
| Rated Current - Cooling | 11 A |
| Rated Current - Heating | 11 A |
| MOCP | 20 A |
| MCA | 14.5 A |
| Main Power Wire Size | Per Local Code |
| Interconnecting Wire Size | 14 / 4 AWG |
Features & Functions Summary
- Inverter Type: Inverter Driven
- Ultra Low Frequency Torque Control: Yes
- Compressor Type - Inverter: Yes
- Basepan With Electric Heater: Yes
- Indoor & Outdoor Fin Coating (Blue Fin): Yes
- Intelligent Defrosting: Yes
- Intelligent Preheating: Yes
- Low Voltage Startup: Yes
- Memory/Power Failure Recovery: Yes
- Self Diagnosis: Yes
*GWIN Tech only pays for commissioning of system. Installation and additional refrigerant to the system is not included.
The Evolution of DIY Mini Splits
GWIN™ Assisted DIY™
Most DIY mini splits still leave the hardest parts up to you — pressure testing, vacuuming the system, handling refrigerant, or finding your own tech, and even dealing with bulky pre-charged line sets. GWIN™ HVAC changes all of that with Assisted DIY™. The GWIN Assisted DIY 18,000 BTU 230V King (18k condenser 9K+9K Wall Mount) Complete System With 15' Line Set Communication Wire and GWIN Assisted DIY Tech with Assisted DIY™ is an evolution over DIY alone and makes GWIN™ a complete DIY mini split system that includes free expert tech support, with a tech included, so you never need special tools, never touch refrigerant, never run a vacuum pump, and never perform a pressure test. Our line sets with our easy connect flare-less fittings, allow for a professional operating system, with a professional look. Which also means no coiled mess and no guesswork — just a straightforward self-install ductless system that goes in like a true DIY HVACproject, backed by professionals every step of the way. Whether you're cooling or heating a garage, basement, bedroom, sunroom, home addition, tiny home, or cabin — GWIN™ HVAC is the ultimate DIY ductless solution with our Assisted DIY™ for homeowners who want to do it themselves, but done right." GWIN™ HVAC is the advanced version of DIY mini splits.
